GE70ES-2RS Bearing

T max.:100 °C; G:M6x1; Dz:80 mm; A2:30 mm; Recommended tightening torque for set screw:8 Nm; s1:16 mm; Designation of housing:T207N-; S:8.5 mm; A5:23.5 mm; H:102 mm;

Weight:18.3 kg; T max.:100 °C; d:90 mm; B:87.3 mm; C0:108 kN; e:44 mm; C:143 kN; d1:133 mm; T min.:-20 °C; L:235 mm;

d:41.28 mm; Designation of bearing:US209-26G2T04; H:54 mm; S:10.2 mm; H1:21.5 mm; T min.:-40 °C; L1:54.5 mm; G:R1/8"; N1:29 mm; B:41.2 mm;

Mass:0.06 kg; Weight / Kilogram:0.059; e:17 mm; B2:23 mm; Minimum Buy Quantity:N/A; Min operating temperature, Tmin:-20 °C; B1:36 mm; Brand:NTN; Maximum tightening torque:14 Nm; Bearing with/without cage:Avec;

Dynamic load, C:261 kN; Y2:1.84; B:46.67 mm; Max operating temperature, Tmax:120 °C; Nlim (oil):3,200 rpm; d:80.96 mm; Characteristic inner ring frequency, BPFI:10.31 Hz; Weight / Kilogram:0; Fatigue limit load, Cu:42 kN; d1:114.5 mm;

Mass:1.68 kg; ra max:1.5 mm; k:3.5 mm; Nref:4,600 rpm; Y1:3.13; Characteristic outer ring frequency, BPF0:8.13 Hz; Min operating temperature, Tmin:-40 °C; d:75 mm; Dynamic load, C:244 kN; Y0:3.06;

Enclosure:Open; Nlim (grease):1,800 rpm; precision rating:Class 0; Min operating temperature, Tmin:-60 °C; Maximum Capacity / Filling Slot:No; Rolling Element:Ball Bearing; outer ring width:56 mm; Internal Clearance:C3-Loose; Long Description:220MM Bore; 340MM Ou; Outside Diameter:13.386 Inch | 340

Shaft Attachment Type:SETSCREW; Ship Weight:28.3 LB; Expansion Type:Non-Expansion; Bearing Series:215 Series; Housing Product Type:TYPE E; Bearing Bore Shape:Tapered; Brand:Baldor-Dodge; Housing Type:4 Bolt Pillow Block; Split Housing:NO; Bearing Insert Material:Steel;

N:14mm; d:45 mm; C:31.85 kN; G:R1/8"; T min.:-20 °C; T max.:200 °C; B:41.2 mm; Designation of housing:PE209-; H:54 mm; s1:20.6 mm;

rs min:0.3 mm; D:22 mm; Da max:20 mm; d:7 mm; Radial clearance class:CM; Dynamic load, C:3.35 kN; da min:9 mm; Max operating temperature, Tmax:120 °C; Fatigue limit load, Cu:0.06 kN; Mass:0.01 kg;

Designation of bearing:ES210-30G2T20; Weight:1.95 kg; C:35.1 kN; s1:33.4 mm; S:11 mm; C0:23.2 kN; A3:2 mm; B1:43.7 mm; d:47.62 mm; B:30.2 mm;

Brand:Baldor-Dodge; Base to Center Height:Not Applicable; Retainer Type:Max Life Cage; Bearing Outer Ring Material:Steel; Flinger Type:INTERNAL RUBBER LIP; End Cap Groove:Yes; Ship Weight:1.8 LB; Max Bearing Speed:6000 rpm; Ball Grade:Class 24; Housing Type:Flange Bracket;

Designation of housing:FLE209-; T min.:-20 °C; G:R1/8"; B:41.2 mm; e:24 mm; S:10.2 mm; T max.:100 °C; A2:55 mm; Designation of bearing:US209-26G2; N:14mm;

T max.:100 °C; Designation of bearing:US205G2T04; A1:12 mm; S:7.5 mm; C0:7.88 kN; L3:51 mm; C:14 kN; Designation of housing:T205-; P:150 mm; H1:76 mm;

J:184 mm; C0:29.2 kN; L1:104 mm; L:130 mm; S:12 mm; J1:86 mm; Recommended tightening torque for set screw:22 Nm; d1:74.5 mm; G:M6x1; C:43.55 kN;